Datasheet4U Logo Datasheet4U.com

LM2648 - Synchronous Step-Down 3-Channel Switching Regulator Controller

General Description

The LM2648 consists of two current mode and two voltage mode synchronous buck regulator controllers providing 3 outputs at a switching frequency of 300kHz.

Each pair of switching regulator controllers operate 180˚ out of phase.

Key Features

  • analog soft-start circuitry that is independent of the output load and output capacitance. This makes the soft-start behavior more predictable than traditional soft-start circuits. Sequential startup is built in and requires a single capacitor to set the timing. The LM2648 has over-voltage protection and under-voltage protection for all outputs. Two additional comparator inputs (analog and logic level) are provided to shut down the IC for any user defined protection. The FAULT_DELAY pin allows d.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM26480 1.5-A Buck Regulators and Dual 300-mA LDO Texas Instruments
LM26480-Q1 1.5-A Buck Regulators and Dual 300-mA LDO Texas Instruments
LM26484 Power Management Unit Texas Instruments
LM2640 Dual Adjustable Step-Down Switching Power Supply Controller Texas Instruments
LM26400Y 500-kHz Wide Input Range Buck Regulator Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM2640 Dual Adjustable Step-Down Switching Power-Supply Controller
LM26400Y 500kHz Wide Input Range Buck Regulator
LM2641 Dual Adjustable Step-Down Switching Power Supply Controller
LM2642 Two-Phase Synchronous Step-Down Switching Controller
LM2645 Advanced Two-Phase Switching Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM2648 Two-Phase, Synchronous Step-Down 3-Channel Switching Regulator Controller December 2004 LM2648 Two-Phase, Synchronous Step-Down 3-Channel Switching Regulator Controller General Description The LM2648 consists of two current mode and two voltage mode synchronous buck regulator controllers providing 3 outputs at a switching frequency of 300kHz. Each pair of switching regulator controllers operate 180˚ out of phase. This feature reduces the input ripple RMS current, thereby significantly reducing the required input capacitance. The two current mode regulator outputs operate as a dualphase, single output regulator for high current applications.